Effect of Surface Treatments on the Color Change and Shear Bond Strength of Porcelain Laminate Veneer

Document Type : Original Article

Authors

1 2A teeba buildings zahraa almaadi cairo egypt

2 fixed prosthodontics, faculty of dentistry, suez canal university

3 Oral Laser Application Department National Institute of Laser Enhanced Sciences - Cairo University

4 fixed prosthodontics, faculty of dentistry, suez canal university.

Abstract

Effect of Surface Treatments on the Color Change and Shear Bond Strength of Porcelain Laminate Veneer
Aim of the study: the purpose of this Invitro study to evaluate the effect of surface treatments on the color change and shear bond strength of lithium disilicate glass ceramic veneers.
Materials & Methods: Twenty square samples with dimensions (8x8x2) and another twenty samples with smaller dimensions (4x4x2) were cut from five IPS e-max CAD blocks of shade A3. The discs were divided into two groups: 1) Half of the small and large blocks were subjected to hydrofluoric acid (HF); 2) the other half was subjected to Co2 laser irradiation. The conditioned samples were subdivided according to the bonding agent: A) Silane application for 60 seconds; B) Single bond universal light cured for 10 seconds. Each small sample was cemented on the top of a large sample using Rely-x veneer cement with translucent shade. The color change was measured using spectrophotometer. The shear bond strength was tested using a universal testing machine.
Results: HF resulted in higher bond shear bond strength and ΔE than Co2 laser. Single bond universal resulted in higher shear bond strength values than silane.
Conclusion: HF followed by either single bond universal or silane could be the best surface treatment for e-max CAD ceramic. However, Co2 laser could be a promising alternative surface treatment.

Keywords

Main Subjects

Files

Share

How to cite

Statistics